stand build rules

Stand Height Limitation

No part of a stand or exhibit should exceed four metres in height. This does not aply to banners hanging above a stand.

Stand Build Guidelines

A minimum of 50% of any open side must remain fully open. Please ensure that your stand conforms to the requirements and does not visually block neighbouring stands off from the rest of the exhibition. Party walls on any stand must be finished in a neutral colour on the entire rear face. The party wall should be dressed full height at this show as many stands do not have a full build. The Organiser reserves the right to inspect and require the exhibitor to conform to these rules. Please note, receiving a Drawing Inspection Notice does not mean that adjoining stand plans have been checked for compatibility. Graphics, branding and logos are not to be placed on towers or other structures at the rear of the stand so as to blatantly overshadow an adjoining stand and must be shown on all drawings submitted for approval. The appointed Technical Management Team reserve the right to arbitrate in any dispute and their decision is final.

Access to Stands

Exhibitors should note that access to their stand is only via open sides. A row stand has one open side, that is the front. Corners have 2 open sides, Endcaps 3 and Islands 4. Exhibitors should not access their stand via another exhibitors stand. When planning a lay out please ensure you have allowed for access to your stand.